6 x Dustcap for RFT BR25, BR26, BR50, BR100, 7102

PLEASE NOTE: SEE DIRECTIONS AT THIS OFFER.

6 x Dustcap for RFT BR25, BR26, BR50, BR100, 7102
€ 17.88 12.98 *Prices include VAT
Article codeSDC43Px6
NOTE: The diameter of this SDP43P dust cover is 43 mm, so that it fits just over the original dust cover. You should keep the original mounting lip of the original dust cover on the cone. If you try to remove it, you will run a large way to damage the cone at a very vulnerable point. The solution is to carefully remove the defective dust cover with, for example, a scalpel or a sharp hobby knife (! NOTE YOUR FINGERS AND HANDS!). Then place the SDP43P dust cover over the mounting slip. As you can see, this SDP43P fits exactly over the original mounting lip. The original dust cover is a 39 mm, our SDP43P almost matches that. All actions are at your own risk.